LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Escape XLS, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Keyless Entry Keypad >> Removal and Installation

Removal and Installation

  1. Remove the LH front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Position the water shield aside.
  3. Remove the keypad retaining clip.
  4. Remove the keypad from the door.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals