Section 1892 (HVAC - Climate Control System - General Information And Diagnostics): Specifications

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item	Specification	Fill Capacity
Motorcraft® A/C System Flushing Solvent YN-23	-	-
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	118 ml (4 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada); MYN-19 (Mexico)	WSH-M17B19-A	0.54 kg (19 oz) (1.19 lb)
Stay-Brite® R-134a Leak Detection Dye 164-R6060 (Rotunda)	-	-

GENERAL SPECIFICATIONS

Item

Specification

A/C Compressor

Type

10S20C

A/C Pressure Relief Valve ⁽¹⁾

Open pressure

3, 447-4, 137 kPa (500-600 psi)

Close pressure

2758 kPa (400 psi)

Evaporator Temperature Sensor

ON temperature

3°C (37°F)

OFF temperature

2°C (36°F)

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.