Connecting Rod Bend

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS DESCRIPTION CHART

Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent

NOTE: Refer to the appropriate Engine Mechanical article, for the specification.

Using the Feeler Gauge Set, measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.

Fig 1: Measuring Connecting Rod Bend Using Feeler Gauge Set

Courtesy of FORD MOTOR CO.