LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Edge SEL, 3.5 C, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 865 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake Shield >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to Brake Disc  in this article.
  2. Remove the 3 brake disc shield bolts and the brake disc shield.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals