LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Edge SEL, 2.0 9 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission - 6F35 >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Installation

Output Shaft Speed (OSS) Sensor: Installation

  1. Install the OSS sensor and the OSS sensor bolt.
    • Tighten to 10 Nm (89 lb-in).
      Fig 1: Locating Output Shaft Speed Sensor Bolt
      G07932029Courtesy of FORD MOTOR CO.
  2. Install the main control. For additional information, refer to MAIN CONTROL VALVE BODY .
scientia non olet · About LEMON Manuals