LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Edge Limited, 3.5 C, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6F50/6F55 >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Installation

Output Shaft Speed (OSS) Sensor: Installation

  1. Install the OSS sensor and the bolt.
    • Tighten to 12 Nm (106 lb-in).
      Fig 1: Locating OSS Sensor And Bolt
      G07931099Courtesy of FORD MOTOR CO.
  2. Install the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY .
scientia non olet · About LEMON Manuals