Axle Assembly: Installation

WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If replacing the axle assembly, the 4x4 control module will need to be reconfigured with the new Active Torque Coupling (ATC) bar code information. If the new bar code information does not match the existing 4x4 control module information, driveline damage or driveability concerns can occur.
If installing a new RDU , re-configure the Automatic Torque Coupling (ATC). Refer to AUTOMATIC TORQUE COUPLING (ATC) CONFIGURATION .
To install, reverse the removal procedure.