PINPOINT TEST TA: Clutch Pedal Position (CPP) Switch: Introduction

WARNING: This page is about a different variant/trim than selected.

This pinpoint test is intended to diagnose the following:

CPP switch (11A152/7C534)
harness circuits: CPP-BT and GND
powertrain control module (PCM) (12A650)

Fig 1: Identifying Clutch Pedal Position (CPP) Switch Connector
Courtesy of FORD MOTOR CO.

Powertrain Control Module (PCM) Connector

For PCM connector views or reference values, refer to REFERENCE VALUES article.

Vehicle	Connector	Pin	Circuit
F-Series Super Duty, Mustang 5.4L, Mustang 5.0L	190-PIN	T19	CPP-BT
Fiesta	128 PIN	B7	CPP-BT
Focus	154 PIN	B13	CPP-BT
All other vehicles	190-PIN	T26	CPP-BT