One-Touch Integrated Start (OTIS)

The vehicle is equipped with OTIS, a computer-assisted cranking system. This feature assists in starting the engine. If the ignition key is turned to the START position and released when the engine begins cranking, the engine may continue cranking for up to 10 seconds or until the vehicle starts.

Once the ignition is turned to the START position, the PCM reads starter motor request from the ignition switch and gains control of the starter engagement. The customer is no longer in the loop after the initial crank request, the customer may release the key to the RUN position. The PCM will disengage the starter motor based on the following events:

• The engine is started (RPM threshold)
• A set time has been exceeded
• The ignition key has been turned to the OFF position