LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (Auxiliary Brake System) >> Removal And Installation >> Trailer Brake Control (TBC) Module >> Removal

Trailer Brake Control (TBC) Module: Removal

WARNING: This page is about a different variant/trim than selected.
    NOTE: Care must be taken not to damage the coin tray/storage bin, switch assembly (if equipped) or finish panel during removal.
  1. Using a small screwdriver, or similar tool, remove the coin tray/storage bin (or switch assembly if equipped) by prying out on the RH side of the tray/bin.
    • If equipped with a switch assembly, disconnect the electrical connector.
  2. Pull the Trailer Brake Control (TBC) module out of the instrument panel and disconnect the electrical connector.
scientia non olet · About LEMON Manuals