LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake >> Removal

Front Disc Brake: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the brake caliper anchor plate. For additional information, refer to BRAKE CALIPER ANCHOR PLATE  .
  2. Remove the brake disc and hub in the following sequence:
    1. Remove the hub grease cap.
    2. Remove the cotter pin.
    3. Remove the nut retainer.
    4. Remove the spindle nut.
    5. Remove the outer wheel bearing retainer washer.
    6. Remove the outer wheel bearing.
    7. Remove the brake disc and hub.
  3. Remove the wheel hub grease seal and inner wheel bearing in the following sequence:
    1. Remove the wheel hub grease seal.
    2. Remove the inner wheel bearing.
  4. Inspect the brake disc and resurface or install new as necessary. For additional information, refer to the Diagnosis and Testing portion of BRAKE SYSTEM - GENERAL INFORMATION .
scientia non olet · About LEMON Manuals