LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine System - General Information -- E-Series) >> Diagnosis And Testing >> Engine >> Oil Pressure Test

Oil Pressure Test

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and remove the oil pressure sensor from the engine.
  2. Connect the Oil Pressure Gauge to the Engine Oil Pressure (EOP) sender oil galley port.
  3. Run the engine until normal operating temperature is reached.
  4. Run the engine at the specified RPM and record the gauge reading.
  5. The oil pressure should be within specifications; refer to the SPECIFICATION CHART  in the appropriate engine information.
  6. If the pressure is not within specification, check the following possible sources:
    • Insufficient oil
    • Oil leakage
    • Worn or damaged oil pump
    • Oil pump screen cover and tube
    • Excessive main bearing clearance
    • Excessive connecting rod bearing clearance
scientia non olet · About LEMON Manuals