LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different variant/trim than selected.
SYMPTOM CHART

Condition Possible Sources Action
  • The safety belt warning indicator does not operate
  • Burned-out warning indicator
  • Circuitry
  • Instrument Cluster (IC) module
  • Restraints Control Module (RCM)
  • The safety belt warning chime does not operate
  • Safety belt buckle switch
  • IC module
  • RCM
  • Wiring, terminals or connectors
  • The safety belt retractor webbing does not extract or exhibits excessive pressure on the occupant during use
  • Safety belt retractor is in Automatic Locking Retractor (ALR) mode
  • Safety belt retractor is binding internally
  • The safety belt retractor webbing does not retract or has excessive slack during use
  • Twisted or incorrectly routed safety belt webbing
  • Safety belt retractor is binding internally
  • Safety belt retractor
  • INSTALL a new safety belt retractor. REFER to the appropriate procedure .
  • The Belt-Minder® feature is inoperative
  • Belt-Minder® feature is deactivated
  • Circuitry
  • Safety belt procedure after a collision
  • Safety belt retractors
  • Safety belt buckles
  • Safety belt shoulder height adjuster(s)
  • Child safety seat attachment components
  • The safety belt tongue is rotated on the safety belt webbing
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is twisted at the safety belt guide
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is dirty or soiled
  • Dirty or soiled safety belt webbing