LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Transit Connect Van Cargo >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System (Pats) >> General Procedures >> Key Programming Switch State Control >> Special Tool(s)

Special Tool(s)

SPECIAL TOOLS DESCRIPTION

G07482720
 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the Instrument Cluster (IC). For additional information, refer to KEY PROGRAMMING USING TWO PROGRAMMED KEYS  in this service information. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.
NOTE: The spare key programming switch state can be viewed with the IC  SPAREKEY PID.
NOTE: If the SPAREKEY PID reads ENABLE, up to 8 keys total can be programmed into the IC  using Key Programming Using Two Programmed Keys in this service information. If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys procedure does not function. This switch is set to ENABLE when the vehicle is built. This PID only affects the Key Programming Using Two Programmed Keys procedure.
  1. Insert a programmed Passive Anti-Theft System (PATS) key (or Integrated Keyhead Transmitter (IKT)) PATS  key (if equipped) into the ignition lock cylinder and turn the key from the OFF position to the ON position.
  2. From the scan tool, enter TOOLBOX. Select BODY - SECURITY - PATS  Functions and follow the IDS  on-screen instructions to ENTER SECURITY ACCESS. For additional information, refer to ANTI-THEFT SECURITY ACCESS  in this service information.
    3. NOTE: The default setting on delivery of all new vehicles is ENABLED, when viewing the IC  SPAREKEY PID.
  3. From the scan tool menu select: "Customer Spare Key Programming Enable" and follow the IDS  on-screen instructions in order to complete the procedure.
    • "Customer Spare Key Programming Enable" - spare key programming procedure is accessible.
    • "Customer Spare Key Programming Disable" - spare key programming procedure is not accessible.
scientia non olet · About LEMON Manuals