LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Taurus SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate Engine article for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G07806411Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge Reading Using Micrometer
    G07806412Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals