LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Taurus SE >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

NOTE: This procedure only applies to vehicles equipped with Hydraulic Power Assist Steering (HPAS).
  1. Remove the steering column shrouds. For additional information, refer to STEERING COLUMN article.
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Drive the vehicle and make several tight circles to calibrate the new sensor.
scientia non olet · About LEMON Manuals