Seat Wire Harness Routing: Notes

For correct front passenger seat cushion wire harness routing with Occupant Classification System (OCS) weight sensor bolts, refer to the following views.
- Match the numbers in the wire harness view to the numbers in the retainer and connector location views and attach accordingly.
- Wire harness retainers and electrical connectors are called out in assembly order.

NOTE: Illustration position with the seat in the vehicle (arrow indicates front).

Verify the correct passenger seat OCS weight sensor bolt electrical connector positions using the illustration.
- For correct identification and placement of the 4 OCS weight sensor bolt electrical connectors, use the wire colors identified in SYSTEM WIRING DIAGRAMS article. Connecting the incorrect connector to a sensor will cause DTCs to set and will result in an unsuccessful OCS system reset.
  
  Fig 1: Locating OCS Weight Sensor Bolts Position
  Courtesy of FORD MOTOR CO.