Component testing procedure - Roof opening panel control switch
ROOF OPENING PANEL CONTROL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt Switch | 12 and 3 | Push Tilt (UP) | Closed circuit |
| 12 and 8 | Pull Tilt (DOWN) | Closed circuit | |
| Slide Switch | 12 and 6 | Push Slide (OPEN) | Closed circuit |
| 12 and 8 | Pull Slide (CLOSE) | Closed circuit |