Component testing procedure
WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate | |
|---|---|---|---|---|
| Left mirror | Up | 3 and 5 6 and 1 |
Selector switch left Adjuster switch up |
Closed circuit |
| Down | 3 and 6 5 and 1 |
Selector switch left Adjuster switch down |
Closed circuit | |
| Left | 3 and 8 6 and 1 |
Selector switch left Adjuster switch left |
Closed circuit | |
| Right | 3 and 6 8 and 1 |
Selector switch left Adjuster switch right |
Closed circuit | |
| Right mirror | Up | 3 and 2 6 and 1 |
Selector switch right Adjuster switch up |
Closed circuit |
| Down | 3 and 6 2 and 1 |
Selector switch right Adjuster switch down |
Closed circuit | |
| Left | 3 and 7 6 and 1 |
Selector switch right Adjuster switch left |
Closed circuit | |
| Right | 3 and 6 7 and 1 |
Selector switch right Adjuster switch right |
Closed circuit | |