Seat Backrest - Front, 60 Percent: Assembly

WARNING: This page is about a different car, the 2009 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Slide the backrest frame into the headrest pocket.

Fig 1: Sliding Backrest Frame Into Backrest Foam Pad
Courtesy of FORD MOTOR CO.
Install the lower end of the foam pad onto the backrest frame.

Fig 2: Installing Lower End Of Backrest Foam Pad On Backrest Frame
Courtesy of FORD MOTOR CO.
Install the trim cover and all of the hog rings.

Fig 3: Locating Hog Rings And Backrest Trim Cover
Courtesy of FORD MOTOR CO.
Pull the trim cover down and secure the hook-and-loop strips to the backrest foam pad.

Fig 4: Pulling Backrest Trim Cover Down
Courtesy of FORD MOTOR CO.
Attach the backrest J-clip.

Fig 5: Identifying Backrest J-Clip
Courtesy of FORD MOTOR CO.
Install the backrest assembly. For additional information, refer to SEAT BACKREST - FRONT, 60 PERCENT .