LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Ranger 2D Pickup, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Piston Pin Bore Diameter

Piston Pin Bore Diameter

NOTE: Refer to the ENGINE MECHANICAL - 2.3L or ENGINE MECHANICAL - 4.0L SOHC article(s) for the specification.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
    Fig 1: Identifying Piston Pin Bore Diameter Measuring Directions
    G07798471Courtesy of FORD MOTOR CO.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
scientia non olet · About LEMON Manuals