Removal and Installation

All vehicles 

1. Disconnect the battery. For additional information, refer to BATTERY, BATTERY MOUNTING & BATTERY CABLES article.
2. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION SYSTEM & INTAKE AIR FILTERING SYSTEM article.
3. Rotate the Front End Accessory Drive (FEAD) belt tensioner counterclockwise and position the accessory drive belt.
4. Remove the 2 bolts and position the generator.
   • To install, tighten to 25 Nm (18 lb-ft).
5. Disconnect the electrical connector from the generator.
6. Position the protective cover, remove the nut and position the generator B+ terminal.
   • To install, tighten to 8 Nm (71 lb-in) (early build).
   • To install, tighten to 17 Nm (150 lb-in) (late build).

   Vehicles equipped with A/C 

7. Remove the 2 bolts that secure the fan shroud and position the shroud.
   • To install, tighten to 7 Nm (62 lb-in).

   All vehicles 

8. Remove the generator.
9. To install, reverse the removal procedure.