Seat Position Sensor
WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Driver seat shown in illustration, passenger seat similar (if equipped).
PART DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | W302077 | Seat position sensor bolt |
| 2 | - | Seat position sensor electrical connector (part of 14A699) |
| 3 | 14B416 | Seat position sensor |
- Remove the affected front seat. For additional information, refer to the Removal and Installation portion of SEATING .
- Disconnect the seat position sensor electrical connector.
- Remove the bolt and seat position sensor.
- To install, tighten to 6 Nm (53 lb-in).
- To install, reverse the removal procedure.
- Install the front seat. For additional information, refer to the Removal and Installation portion of SEATING .
WARNING:
Always tighten the seat position sensor retaining bolt to specified torque. Failure to do so may result in incorrect restraint system operation, which increases the risk of personal injury or death in a crash.