LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (HVAC - Climate Control System - General Information And Diagnostics) >> Specifications >> Item Specification

Item Specification

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION

Item Specification Fill Capacity
A/C Cooling Coil Coating
YN-29
- -
A/C System Flushing Solvent
YN-23
- -
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B 118 ml (4 fl oz)
R-134a Refrigerant
YN-19 (US); CYN-16-P or CYN-16-R (Canada)
WSH-M17B19-A 0.60 kg (21 oz) (1.31 lb)


ITEM SPECIFICATION

Item Specification
A/C Compressor Magnetic Clutch 
Air gap clearance 0.35-0.60 mm (0.014-0.024 in)
A/C Cycling Switch Open and Closed Pressures (1)
Open pressure 145-159 kPa (21-23 psi)
Closed pressure 290 kPa (42 psi)
A/C Pressure Relief Valve (1)
Open pressures 3,792-4,137 kPa (550-600 psi)
Evaporator Discharge Air Temperature Sensor 
OFF temperature 6°C (43°F)
ON temperature 7.5°C (45.5°F)
Refrigerant System Dye 
R-134a Leak Detection Dye 164-R6060 or 164-R6081 -
(1) Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve and the A/C pressure transducer location.