LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1313 (Engine System - General Information) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the ENGINE - 4.0L SOHC , ENGINE - 4.6L (3V) , and ENGINE - 5.4L (4V) for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
    Fig 1: Measuring Diameter Of Intake And Exhaust Valve Stem Points
    G06289036Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals