LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1313 (Engine System - General Information) >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the ENGINE - 4.0L SOHC , ENGINE - 4.6L (3V) , and ENGINE - 5.4L (4V) for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G06064087Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge Using Micrometer
    G06064088Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals