Material Specifications

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATIONS

Item

Specification

Fill Capacity

Additive Friction Modifier
XL-3 (US); CXL-3 (Canada)

EST-M2C118-A

118 ml (4 oz)

Motorcraft® High Contrast Hypoid Gear Marking Compound
XG-14

Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL (US); CXY-75W140-1L (Canada)

WSL-M2C192-A and GL-5

8.8-in rear axle⁽¹⁾

Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL (US); CXY-80W90-1L (Canada)

WSP-M2C197-A

7.5-in rear axle⁽²⁾

Premium Long-Life Grease
XG-1-C or XG-1-K (US); CXG-1-C (Canada)

ESA-M1C75-B

Threadlock 262
TA-26

WSK-M2G351-A6

⁽¹⁾	Service refill capacities are determined by filling the axle to the bottom of the filler hole. The vehicle must be on a level surface.

⁽²⁾	Service refill capacities are determined by filling the axle 11.1-12.7 mm (0.4375-0.515 in) below the bottom of the filler hole. The vehicle must be on a level surface.