LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus SEL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Cruise Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver air bag module. For additional information, refer to DRIVER AIR BAG MODULE .
  2. Remove the cruise control switch(es) harness ground screw.
  3. Disconnect the cruise control switch(es) electrical connector.
  4. Remove the cruise control switch by pulling the switch toward the rear of the vehicle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals