LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus SE, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> General Procedures >> Seat Position Sensor

Seat Position Sensor

Fig 1: Seat Position Sensor, Electrical Connector And Lock Tab
G06438193Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Seat position sensor electrical connector (part of 14A699)
2 14B416 Seat position sensor
3 - Seat position sensor lock tab
  1. Position the driver seat to the rearmost and maximum height position.
  2. Depower the Supplemental Restraint System (SRS). For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in the General Procedures .
  3. Disconnect the seat position sensor electrical connector.
  4. Remove the lock tab from the seat position sensor.
  5. Remove the seat position sensor from the bracket.
  6. To install, reverse the removal procedure.
  7. Repower the SRS. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in the General Procedures .
scientia non olet · About LEMON Manuals