- The vehicle does not start with the scan tool connected to the Data Link Connector (DLC) and/or multiple malfunction indicators are only on when the scan tool is connected to the DLC
.
|
- Wiring, terminals or connectors
- Scan tool
|
|
- The PCM does not respond to the scan tool
|
- Wiring, terminals or connectors
- PCM
|
- Refer to the INTRODUCTION
, Section 5
, pinpoint test QA before proceeding to Pinpoint Test A. If pinpoint test QA has been completed, go to PINPOINT TEST A .
|
- The ABS module does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- ABS module
|
|
- The Instrument Cluster (IC) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- IC
|
|
- The Restraints Control Module (RCM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- Case ground open
- RCM
|
|
- The Occupant Classification System Module (OCSM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- OCSM
|
|
- The 4X4 control module does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- 4X4 control module
|
|
- The Power Steering Control Module (PSCM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- PSCM
|
|
- The Steering Angle Sensor Module (SASM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- SASM
|
|
- The Parking Aid Module (PAM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- PAM
|
|
- The HVAC module does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- HVAC module
|
|
- The Audio Control Module (ACM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- ACM
|
|
- The audio Digital Signal Processing (DSP) module does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- Audio DSP
module
|
|
- The Front Controls Interface Module (FCIM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- FCIM
|
|
- The Front Display Interface Module (FDIM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- FDIM
|
|
- The Driver Seat Module (DSM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- DSM
|
|
- The Rear Entertainment Module (RETM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- RETM
|
|
- The Liftgate/Trunk Module (LTM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- LTM
|
|
- The Smart Junction Box (SJB) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- SJB
|
|
- The Global Positioning System Module (GPSM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- GPSM
|
|
- The Accessory Protocol Interface Module (APIM) does not respond to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- APIM
|
|
- Intermittent no High Speed Controller Area Network (HS-CAN) communication, communication can be intermittently established
|
- Wiring, terminals or connectors
|
|
- No High Speed Controller Area Network (HS-CAN) communication, all modules are not responding
|
- Wiring, terminals or connectors
- 4X4 control module (if equipped)
- ABS module
- APIM
- IC
- OCSM
- PAM
- PCM
- PSCM
- RCM
- SASM
|
|
- Intermittent no Medium Speed Controller Area Network (MS-CAN) communication, communication can be intermittently established
|
- Wiring, terminals or connectors
|
|
- No Medium Speed Controller Area Network (MS-CAN) communication, all modules are not responding
|
- Wiring, terminals or connectors
- ACM
- APIM
- Audio DSP
module (if equipped)
- DSM
(if equipped)
- FCIM
- FDIM
- GPSM
- HVAC module (if equipped)
- IC
- LTM
- RETM
- SJB
|
|
- No power to the scan tool
|
- Fuse
- Wiring, terminals or connectors
- Scan tool
|
|