Component testing procedure
WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 1 and 3 | Tilt Up | Closed circuit |
| Down | Open circuit | ||
| Open | Open circuit | ||
| Close | Open circuit | ||
| Down | 1 and 2 | Tilt Up | Open circuit |
| Down | Closed circuit | ||
| Open | Open circuit | ||
| Close | Open circuit | ||
| Open | 1 and 4 | tilt Up | Open circuit |
| Down | Open circuit | ||
| Open | Closed circuit | ||
| Close | Open circuit | ||
| Close | 1 and 5 | Tilt Up | Open circuit |
| Down | Open circuit | ||
| Open | Open circuit | ||
| Close | Closed circuit |