Section 23 (Suspension System - General Information): Specifications
WARNING: This page is about a different car, the 2012 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
All alignment specifications are with the vehicle fuel tank full.
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Split | Thrust Angle | ||
|---|---|---|---|---|---|---|
| Front | ||||||
| Camber(1) | -0.70° ± 0.75° | -0.70° ± 0.75° | 0.00° ± 0.75° | - | ||
| Caster(1) | 3.37° ± 0.75° | 3.37° ± 0.75° | 0° ± 0.75° | - | ||
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | 0.15° ± 0.35° | - | ||
| Rear | ||||||
| Camber(1) | -1.52° ± 0.75° | -1.52° ± 0.75° | - | - | ||
| Only total toe defined | - | - | 0.31° ± 0.30° | 0° ± 0.50° | ||
|
||||||
CLEAR VISION @ STRAIGHT DRIVE SPECIFICATION
| Location | Nominal | Tolerance |
| Front | 0.50 | +/-2.00 |
| Rear | Not applicable | Not applicable |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0-0.2 mm (0-0.008 in) |
| Ride Height | |
| Front | 15 mm (0.59 in) ± 9 mm (0.354 in) |
| Rear | 39 mm (1.535 in) ± 9 mm (0.354 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Tie-rod end jam nut | 85 | 63 |