Starting System

The starting system consists of the following:

Without Intelligent Access 

• Battery
• Battery cables
• Ignition switch
• Starter motor
• Starter relay (located in the Battery Junction Box (BJB)
• PCM (located in the engine compartment attached to the battery tray)
• Transmission Range (TR) sensor (automatic transaxle-equipped vehicles) (located on the transaxle)
• Clutch Pedal Position (CPP) switch (manual transmission-equipped vehicles) (located on the clutch pedal)
• Transmission Control Module (TCM) (located on the transaxle)
• Integrated Keyhead Transmitters (IKTs)

With Intelligent Access 

• Battery
• Battery cables
• Start/stop switch
• Starter motor
• Starter relay (located in the BJB 
• PCM (located in the engine compartment attached to the battery tray)
• Brake pedal switch (automatic transaxle)
• TR  sensor (automatic transaxle-equipped vehicles) (located on the transaxle)
• CPP  switch (manual transmission-equipped vehicles) (located on the clutch pedal)
• TCM  (located on the transaxle)
• Intelligent Access (IA) key
• Remote Function Actuator (RFA) module