LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Information & Entertainment Systems) >> Removal And Installation >> Front Controls/Display Interface Module (FCDIM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel upper finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the two screws and remove the FCDIM.
    • Disconnect the FCDIM electrical connectors.
      Fig 1: Removing Front Controls/Display Interface Module
      G07980701Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals