LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Transaxle Case >> Assembly

Transaxle Case: Assembly

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If a new differential gear bearing, transmission case, differential or clutch housing are installed, measure the differential shim for the correct size. For additional information, refer to DIFFERENTIAL SHIM SELECTION .

    Using the special tools, install the differential gear bearing cup.

    Fig 1: Installing Differential Gear Bearing Cup Using Special Tools
    G08867310Courtesy of FORD MOTOR CO.
  2. Install the new halfshaft seal on the special tools.
    Fig 2: Installing Halfshaft Seal Onto Special Tool
    G08867311Courtesy of FORD MOTOR CO.
  3. Using the special tools, install the new halfshaft seal.
    Fig 3: Installing LH Halfshaft Seal Using Special Tools
    G08867312Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals