LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Mechanical - 1.6L) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different car, the 2012 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the connecting rod bearings from the connecting rod and cap.
  2. Remove the piston rings from the piston.
    • Discard the piston rings.
    3. NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod for reassembly.
    NOTE: Use a portable multipurpose press (such as OTC® 5180 or equivalent).
  3. Using the portable multipurpose press, press the piston pin out of the connecting rod and piston assembly.
  4. Separate the piston from the connecting rod.
  5. Clean and inspect the piston and connecting rod. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION .
scientia non olet · About LEMON Manuals