LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Anti-Theft System - Passive Anti-Theft System) >> General Procedures >> Key Programming Using Diagnostic Equipment >> Without Intelligent Access (IA)

Without Intelligent Access (IA)

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Program a minimum of 2 keys into the vehicle.
NOTE: This procedure only programs the Passive Anti-Theft System (PATS) portion of the key into the Instrument Panel Cluster (IPC). It does not program the Remote Keyless Entry (RKE) Transmitter Identification Code (TIC) into the Body Control Module (BCM).
  1. Turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body - Security - PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to Enter PATS security access.
    3. NOTE: A maximum of 8 keys can be programmed into the vehicle.
  3. From the scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the Passive Anti-Theft System (PATS) portion of the key(s).
  4. Disconnect the scan tool.
  5. Refer to Remote Keyless Entry (RKE) Transmitter Programming in HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS to program the RKE portion of the key.
scientia non olet · About LEMON Manuals