With Intelligent Access (IA)

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Program a minimum of 2 keys into the vehicle.

NOTE: This procedure programs the Passive Anti-Theft System (PATS) and Remote Keyless Entry (RKE) portions of the key into the Remote Function Actuator (RFA) module.

NOTE: To Enter PATS security access if no programmed Intelligent Access (IA) keys are available, start a vehicle session using a tear tag or PCM part number. Refer to Inspection and Verification in MODULE COMMUNICATIONS NETWORK to start a session. PATS security access can still be granted even with the ignition off.

From the scan tool, enter TOOLBOX. Select Body - Security - PATS Functions and follow the Integrated Diagnostic System (IDS) on-screen instructions to Enter PATS security access.

NOTE: A maximum of 8 keys can be programmed into the vehicle.

From the scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the IA key(s).