LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Fuel System - General Information) >> General Procedures >> Spring Lock Couplings >> Connect

Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align and push the spring lock coupling onto the tube until a click is heard.
    Fig 1: Pushing Spring Lock Coupling Onto Tube
    G06064468Courtesy of FORD MOTOR CO.
  2. Pull on the coupling to make sure it is fully engaged.
  3. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
scientia non olet · About LEMON Manuals