LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SES, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Charging System) >> Removal And Installation >> Generator >> Removal

Removal And Installation: Generator: Removal

WARNING: This page is about a different car, the 2013 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE .
  3. Remove the generator B+ terminal protective cover and nut. Position the generator B+ terminal aside.
  4. Disconnect the generator electrical connector.
  5. Detach the upper degas bottle hose from the fuel rail and position aside.
  6. Remove the generator nut and the stud bolt.
  7. Remove the upper and lower generator bolts.
  8. Remove the generator.
scientia non olet · About LEMON Manuals