LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta SEL, Automatic DCT >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation

Removal and Installation

NOTE: The white stripe on the wheel speed sensor harness is used for orientation purposes. Correct routing of the wheel speed sensor and harness is essential to prevent contact damage to the harness.
  1. Remove the wheel and tire. For additional information, refer to WHEELS & TIRES .
  2. Remove the fender splash shield. For additional information, refer to FRONT END BODY PANELS .
  3. Refer to Figure. Items in the exploded views may not be listed in order of removal.
    NOTE: In order to ensure the most accurate information, some procedural and pinpoint test steps may be under development and not immediately available at vehicle introduction.
scientia non olet · About LEMON Manuals