LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Fiesta S, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Manual Transaxle (IB5)) >> Disassembly And Assembly Of Subassemblies >> Selector Plate >> Assembly

Selector Plate: Assembly

WARNING: This page is about a different car, the 2012 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the selector mechanism.
    1. Selector plate.
    2. Fifth and reverse gear selector rod guide sleeve.
    3. Reverse gear selector lever.
    4. Selector shift shaft.
    5. Fifth and reverse gear selector rod.
    Fig 1: Identifying Selector Mechanism Related Components
    G07980094Courtesy of FORD MOTOR CO.
  2. Install the 2 selector plate bolts.
    • Tighten to 22 Nm (16 lb-ft).
Fig 2: Locating Selector Plate Bolts
G07980092Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals