LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnostic Routine(S) >> Diagnostic Routine AJ >> Diagnostic Overview >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

REFER to WHEEL SPEED SENSOR .

When the ignition is set to ON, the Anti-Lock Brake System (ABS) module carries out a self-test by sending a reference voltage through the wheel speed sensors and their circuitry.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C0031:01 Left Front Wheel Speed Sensor: General Electrical Failure These Diagnostic Trouble Codes (DTCs) set in continuous memory and on-demand if any wheel speed sensor signal current is below 4.5 mA or above 20 mA for longer than 140 milliseconds, or if either sensor circuit is shorted to ground or battery voltage.
C0031:19 Left Front Wheel Speed Sensor: Circuit Current Above Threshold
C0034:01 Right Front Wheel Speed Sensor: General Electrical Failure
C0034:19 Right Front Wheel Speed Sensor: Circuit Current Above Threshold