LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 3.0 G, AWD >> Repair and Diagnosis >> Steering >> Steering Linkage >> Removal And Installation >> Steering Gear Boot >> Removal and Installation

Removal and Installation

  1. Remove the outer tie-rod end. For additional information, refer to TIE ROD END - OUTER  in this service information.
  2. Remove the tie-rod end jam nut.
  3. Remove and discard the 2 steering gear boot clamps and the steering gear boot.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals