LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Taurus SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

NOTE: Refer to the appropriate Engine article for the specification.
  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    Fig 1: Identifying Difference Connecting Rod Bore Out-Of-Round
    G06258547Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals