Seat Wire Harness Routing: Notes

1. For correct front passenger seat cushion wire harness routing with Occupant Classification Sensor (OCS) weight sensor bolts, refer to the following views.
   • Match the numbers in the wire harness view to the numbers in the retainer and connector location views and attach accordingly.
   • Wire harness retainers and electrical connectors are called out in assembly order.
2. NOTE: Illustration shows the OCS  weight sensor bolts in their installed position with the seat in the vehicle (arrow indicates front).

Verify the correct passenger seat OCS  weight sensor bolt electrical connector positions using the illustration.

• For correct identification and placement of the 4 OCS  weight sensor bolt electrical connectors, use the wire colors identified in SYSTEM WIRING DIAGRAMS . Connecting the incorrect connector to a sensor will cause DTCs to set and will result in an unsuccessful OCS  system reset.

Fig 1: Wire Harness View Passenger Seat With Weight Sensor Bolt Occupant Classification Sensor (OCS) And Climate Control

Courtesy of FORD MOTOR CO.