LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Taurus SE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System (Pats) >> General Procedures >> MyKey™ Programming >> Disable MyKey™ Restricted Features

Disable MyKey™ Restricted Features

NOTE: If disabling an IA key, make sure only the admin key is inside the vehicle. It does not need to be in the backup transceiver slot.
  1. NOTE: This procedure is used to disable the MyKey™ feature on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.

    Using an admin key, turn the ignition ON.

    If the vehicle has the IA system, a (PATS) programmed IA key only needs to be inside the vehicle. It does not need to be in the backup transceiver slot.

  2. Press SETUP until PRESS RESET TO CLEAR MYKEY appears.
  3. Press and hold RESET until HOLD RESET TO CONFIRM CLEAR and ALL KEYS ARE CLEARED is displayed.
    • A MyKey™ can also be cleared during the same key cycle that it was programmed by following Steps  2 and  2 of this procedure.
scientia non olet · About LEMON Manuals