Torque Specification Chart
TORQUE SPECIFICATION CHART
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C clutch disc and hub bolt (4.0L) | 13 | - | 115 |
| A/C clutch disc and hub bolt (4.6L, 5.4L) | 20 | - | 177 |
| A/C compressor bolt | 25 | 18 | - |
| A/C compressor fitting nuts (4.6L, 5.4L) (suction and discharge) | 15 | - | 133 |
| A/C compressor nut | 25 | 18 | - |
| A/C pressure relief valve | 10 | - | 89 |
| A/C slim-line fittings | 15 | - | 133 |
| Compressor manifold and tube bracket nut | 25 | 18 | - |
| Compressor manifold bolt | 20 | - | 177 |
| Condenser inlet fitting nut | 15 | - | 133 |
| Condenser inlet line fitting nut | 15 | - | 133 |
| Condenser outlet fitting nut | 15 | - | 133 |
| Evaporator outlet line bracket bolt | 7 | - | 62 |
| Evaporator outlet line fitting nut | 15 | - | 133 |
| Exterior heater core and evaporator core housing nuts | 7 | - | 62 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| High-pressure service gauge port valve extension bracket bolt | 7 | - | 62 |
| Interior heater core and evaporator core housing nut | 9 | - | 80 |
| Lower A/C compressor stud (4.0L) | 25 | 18 | - |
| Lower condenser nut | 9 | - | 80 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Power steering line bracket nut | 9 | - | 80 |
| Power steering pressure hose bracket bolt | 8 | - | 71 |
| Receiver/drier bolt | 9 | - | 80 |
| Radiator bracket bolts | 10 | - | 89 |
| Thermostatic Expansion Valve (TXV) fitting nut | 15 | - | 133 |
| Upper A/C compressor studs (4.0L) | 4 | - | 35 |
| Upper condenser bolt | 9 | - | 80 |
| Wire harness retainer bolt | 20 | - | 177 |