LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Flex SE >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System - General Information >> General Procedures >> Spring Lock Couplings >> Connect

Spring Lock Couplings: Connect

  1. NOTE: Lubricate the tube with clean engine oil.

    Align and push the spring lock coupling onto the tube until fully seated.

    Fig 1: Pushing Spring Lock Coupling Onto Tube
    G06064468Courtesy of FORD MOTOR CO.
  2. Pull on the coupling to make sure it is fully engaged.
  3. Connect the battery ground cable. For additional information, Refer to BATTERY, MOUNTING AND CABLES .
scientia non olet · About LEMON Manuals