LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Explorer 4.6 8, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake >> Installation

Front Disc Brake: Installation

WARNING: This page is about a different car, the 2009 Mercury Mountaineer, 2009 Ford Explorer Sport Trac, and 2009 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from brake disc and wheel hub.
    • Use parts cleaner to clean the front brake disc and hub surfaces.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Install the brake disc.
  4. Position the brake caliper, brake pads and brake caliper anchor plate assembly and install the 2 brake caliper anchor plate bolts.
    • Tighten to 165 Nm (122 lb-ft).
scientia non olet · About LEMON Manuals